Building with ECO BUILDING GROUP means winning in all areas. You can build in less time, with the highest possible way of insulation, with less people, with less costs for heating or cooling and with the highest possible level of comfort afterwards.

Energy efficiency

Energy Efficiency

Using less energy to perform by eliminating energy waste

Low Cost

Low Maintenance Cost

Reduces energy costs and results in a financial cost saving 

Better Environment

Better Environment

Our energy-efficient homes avoid tons of CO2 emission.

ECO BUILDING GROUP realizes constructions in Neopor blocks filled with 15cm reinforced concrete.

First of all we work with our own blocks, product of BASF, made in Germany, in exclusivity for Spain! And this means constant quality control and fast deliveries. We use the highest possible quality and insulation value system for our wall construction, you must also extend that line to the foundation, otherwise, the superior properties of the system will be negatively affected. And so we do with our foundation system.

As for our foundation insulation, we use an EPS (Expanded PolyStyrene) based system. It consists of loose bottom plates and sidewalls, which are provided with unbreakable strips as reinforcement. That makes this system the strongest in the market. In addition, this system is signifi-cant easier and faster to process than traditional systems. For example, additional sand or the use of separate corner pieces are not necessary. A three-part system also creates much less waste.

ECO BUILDING GROUP uses an insulating formwork that ensures a strong connection to the walls without thermal bridges.
The bottom plate can easily be transferred over the metal piket thanks to the integrated provision, so the foundation box can be perfectly aligned to the concrete size. 

Eco Building Group - Made of Neopor

Reinforcement and spacers, that are suitable for insulation on soft surface, are being placed to make sure that there is sufficient concrete cover.The necessary openings for drainage and side walls are being placed. Now only the concrete should be poured, let it dry and the foundation is ready.

The ECO BUILDING GROUP foundation system is unbeatable in processing speed. Apart from the simplicity of installation of a three-part system unlike other systems, there is not the necessity to add sand. Moreover you can perform work such as braiding the reinforcement, placing spacers and making cutouts, much faster.

Our Foundation System

Eco Building Foundation system
  • Planned and produced for your specific construction needs
  • Quick assembly without cutting and preforming tasks at the construction site
  • Significantly easier assembly and measurement
Eco Building Group Foundation
  • Planned and produced for your specific construction needs
  • Quick assembly without cutting and preforming tasks at the construction site
  • Significantly easier assembly and measurement
Eco Building Group Flooring system
  • General Building Regulation Approval (DIBt) for installation under hydrostatic pressure.
  • Predictability in execution
  • Passive house certified system
Eco Building Group - Slab edge Lamination
  • Horizontal below-ground insulation per EN ISO 13793 for structures subject to ‘frost heave’, foundation below soil freezing depth is unnecessary (optional)
  • 10 mm fibre cement sheet slab edge lamination with optional paint-ready surface
  • Increases value of building and easily assembled.

Our wall system

At Eco Building Group we use a few different type of blocks. Of course, there are different dimensions in length and shape, But the basic principle is always the same; there is an internal part of 5 cm insulation, and intermediate part of 15 cm concrete and an external part of insulation that can vary in width, accordingto ecological wishes.

Ecobuilding Blocks
Ecobuilding Group Wall System

The EBG construction method can be compared to a lost formwork, however limited to the creation of a construction in reinforced concrete. The formwork, made of hard insulation material (Neopor) serves as an insulation for the new erected concrete wall, and this on the internal and external side.

Our floor system

At ECO BUILDING GROUP we use a special types, STYRODUR CS, of floor slab system. Whether for buildings designed in accordance with EnEV standards or as a passive house, the ECO BUILDING GROUP foundation is the first choice!.

Due to its excellent insulating properties, Styrodur CS can help to reduce the levels of carbon dioxide emissions (CO2), a major contributor to the current greenhouse effect. In this case, what is good for the environment is good for your economy!.

EPS vloer



It is a simple formula: excellent insulation = significantly lower energy consumption = short-term return on investment.

Thermal insulation with Styrodur CS creates a comfortable interior living climate while protecting your building from external forces like heat, cold and moisture. This extends the life and enhances the value of your building.

ECO BUILDING GROUP floor slab formwork system ensures absolute planning predictability for architects, planners and building owners!

The high load-bearing capacity of Styrodur CS (185 to 355 kPa of compressive stress) together with a compressive creep of 160 kPa over 50 years at < 2% deformation both guarantee a firm footing for your construction over the course of its entire life. 30 years of positive experience with Styrodur CS in load-bearing applications speak for themselves!

Need information? Contact us at +34 604 27 33 06 & +34 951 236 390 - info@ecobuilding.group